Skip to content
Back to TiterPubs

Streptavidin · PE

Dataset ID: DVFD8329 • DOI: 10.64157/DVFD8329

Analysis software: ACTA 3.6.11

Figures

Stain index. Stain index of streptavidin-PE on live cells at each stain volume, with ACTA's Michaelis-Menten fit. The fit (R² 0.879, below the minimum of 0.9 that the run's Info sheet sets before a fit is reported as usable) puts 90% of the fitted maximum at 0.302 µL; the highest stain index, 16.4, is at 5 µL, the highest volume tested.
Saturation. Share of live cells in the positive gate at each stain volume, with the plateau ACTA marks as saturation. Streptavidin-PE reaches it at 1.25 µL, with 8.88% of live cells positive.
Concatenated events. Streptavidin-PE fluorescence (PE-A) of live cells at each stain volume, from the 0 µL co-stain control to 5 µL, each well's events side by side (up to 20,000 per file).
Gating scheme. The run's gating hierarchy, each gate coloured by the method that drew it: cells, single cells and live cells, then on live cells the reagent's positive and negative gates.

Experiment Information

Name
Jatin Sharma
Month of analysis
November
Year of analysis
2026
Collection Software
SpectroFlo
Analysis Software
ACTA
Plug-ins, other analysis tools
openCyto 2.22.0; flowCore 2.22.1; AutoSpectral 1.6.2 (unmixing)
References
https://doi.org/10.5281/zenodo.24181307
Antigen
Streptavidin
Conjugate
PE
Target Species
Human
Clonality
NA
Supplier
BD Biosciences
Catalog #
554061
Lot #
4190488
Other antibodies in tube
CD3 BUV805; CD4 BUV496; CD8 Alexa Fluor 532; Live Dead eFluor 780 (LD) (Viability) efluor780 · see the table
Instrument Manufacturer
Cytek
Instrumentation
Aurora
Lasers (nm)
355, 405, 488, 561, 640
Incubation Time
30 minutes
Incubation temperature (°C)
4
Incubation volume (µL)
100
Gating
live single cells ·
Tissue
blood
Cell type
T cells
Cell count
1000000
Fresh or Frozen
Frozen, thawed and incubated with antibody
Live or Fixed
Live at the time of antibody incubation
Fixed after antibody incubation?
Yes, antibody then fixed
Acquisition date
2026-07-30

Contact the contributor via MetrdyWe pass your message on; contributors' addresses are not published.

Other reagents in the tube

The panel the titrated reagent was stained with. Base reagents are fixed in the panel; Variable is the reagent this dataset titrates.

AntigenFluorochromeCloneVendorCatalog #Role
CD3BUV805SK7BD612893Base
CD4BUV496SK3BD612936Base
CD8Alexa Fluor 532RPA-T8Thermo58-0088-42Base
Live Dead eFluor 780 (LD) (Viability)efluor780Not givenTS65-0865-14Base
StreptavidinPENot givenBD Biosciences554061Variable

A titer holds for the conditions it was run under: cells, instrument and staining conditions all change it. Metrdy checks each submission for completeness before publishing it, but does not validate the results.

ACTA downloads

Full analysis bundle: re-runnable

FCS files

The 12 files

OQ_Test1_Strep-PE_A1_Unstained.fcs, OQ_Test1_Strep-PE_A2_Costain.fcs, OQ_Test1_Strep-PE_A3_Stain.fcs, OQ_Test1_Strep-PE_A4_Stain.fcs, OQ_Test1_Strep-PE_A5_Stain.fcs, OQ_Test1_Strep-PE_A6_Stain.fcs, OQ_Test1_Strep-PE_A7_Stain.fcs, OQ_Test1_Strep-PE_A8_Stain.fcs, OQ_Test1_Strep-PE_A9_Stain.fcs, OQ_Test1_Strep-PE_A10_Stain.fcs, OQ_Test1_Strep-PE_A11_Stain.fcs, OQ_Test1_Strep-PE_A12_Stain.fcs

FCS files (.zip, 12 files, 31.6 MB)

Full ACTA bundle

Everything ACTA wrote for the run: the filled TiterPubs template, the export and instructions workbooks, the panel inventory, the version files, the report, every plot and all 12 FCS files.

Full ACTA bundle (.zip, 41.7 MB)

ACTA report

ACTA's report on the run: its MiFlowCyt metadata, the plate map, the QC checks, every plot, the run's settings and the software versions.

Open in a new tabDownload (5.5 MB)

DOI

https://doi.org/10.64157/DVFD8329

Licence

CC BY 4.0Anyone may share and adapt this dataset, crediting the contributor and citing it.

Citation

Sharma, J. (2026). Streptavidin PE Titration Dataset (TiterPubs DVFD8329) [Data set]. Metrdy. https://doi.org/10.64157/DVFD8329

Analysis software

ACTA 3.6.11 (Anybody Can Titrate Antibody)

Open-source (AGPL-3.0-only), by Jatin Sharma.Copyright (C) 2026 Lyell Immunopharma, Inc.

Bundle and templates written by ACTA's TiterPubs export.

How to cite ACTA

Sharma J. ACTA — Anybody Can Titrate Antibody [software]. Version 3.6.11. Lyell Immunopharma, Inc.; 2026. https://github.com/jatin199517/acta-public. https://doi.org/10.5281/zenodo.24181307

Until the ACTA paper is published, its author asks for ACTA to be cited by its GitHub repository and the version used, and by that version's DOI.

Named because the contributor analysed the data with it. Metrdy did not write ACTA and does not validate its results.

Reproduce this analysis

The bundle holds the instructions workbook that drove the run and the FCS files ACTA read. Install the ACTA version named above, unzip the bundle into an empty folder and run run_acta() on that folder.

remotes::install_github("jatin199517/acta-public@v3.6.11")library(ACTA)r <- run_acta("path/to/the/unzipped/bundle")

ACTA read every event of each file (Downsample_to is blank in the Info sheet): 660,970 events across the 12 files. Its report says the identity matrix was applied and the data were not compensated; the Info sheet's compensation setting is blank, and the bundle holds no compensation file.

Used this titer? Tell other labs how it went. Download the report form, then upload it on the Contribute tab or email it to us. We review every report and add it here, signed with your name.

How community reports workReport a problem privately