Skip to content
Back to TiterPubs

HLA-DR · BUV395

Dataset ID: HTHY7118 • DOI: 10.64157/HTHY7118

Analysis software: ACTA 3.6.11

Figures

Stain index. Stain index of HLA-DR BUV395 on live cells at each stain volume, with ACTA's Michaelis-Menten fit. The fit (R² 0.999) puts 90% of the fitted maximum at 9.76 µL, beyond the highest volume tested (5 µL); the highest stain index, 69.4, is at 5 µL.
Saturation. Share of live cells in the positive gate at each stain volume, with the maximum ACTA marks. The highest share, 22.3% of live cells, is at 5 µL.
Concatenated events. HLA-DR fluorescence (BUV395-A) of live cells at each stain volume, from the 0 µL co-stain control to 5 µL, each well's events side by side (up to 20,000 per file). The co-stain control, well A2, recorded 13,624 events; the contributor reports that acquisition started before recording and that the well was not re-acquired, and ACTA's quantile-based gate still uses it.
Gating scheme. The run's gating hierarchy, each gate coloured by the method that drew it: cells, single cells and live cells, then on live cells the reagent's positive and negative gates.

Experiment Information

Name
Jatin Sharma
Month of analysis
November
Year of analysis
2026
Collection Software
SpectroFlo
Analysis Software
ACTA
Plug-ins, other analysis tools
openCyto 2.22.0; flowCore 2.22.1
References
https://doi.org/10.5281/zenodo.24181307
Antigen
HLA-DR
Clone
L243
Conjugate
BUV395
Target Species
Human
Supplier
BD Biosciences
Catalog #
568647
Lot #
5225371
Other antibodies in tube
CD14 BUV615; CD16 BUV615; CD3 BUV805; CD4 BUV496; CD8 Alexa Fluor 532; Live Dead eFluor 780 (LD) (Viability) efluor780 · see the table
Instrument Manufacturer
Cytek
Instrumentation
Aurora
Lasers (nm)
355, 405, 488, 561, 640
Incubation Time
30 minutes
Incubation temperature (°C)
4
Incubation volume (µL)
100
Gating
live single cells ·
Tissue
blood
Cell type
mononuclear cells
Cell count
500000
Fresh or Frozen
Frozen, thawed and incubated with antibody
Live or Fixed
Live at the time of antibody incubation
Fixed after antibody incubation?
Yes, antibody then fixed
Acquisition date
2026-02-12

Contact the contributor via MetrdyWe pass your message on; contributors' addresses are not published.

Other reagents in the tube

The panel the titrated reagent was stained with. Base reagents are fixed in the panel; Variable is the reagent this dataset titrates.

AntigenFluorochromeCloneVendorCatalog #Role
CD14BUV61561D3Invitrogen366-0149-42Base
CD16BUV6153G8BD OptiBuild751572Base
CD3BUV805SK7BD612893Base
CD4BUV496SK3BD612936Base
CD8Alexa Fluor 532RPA-T8Thermo58-0088-42Base
Live Dead eFluor 780 (LD) (Viability)efluor780Not givenTS65-0865-14Base
HLA-DRBUV395L243BD Biosciences568647Variable

A titer holds for the conditions it was run under: cells, instrument and staining conditions all change it. Metrdy checks each submission for completeness before publishing it, but does not validate the results.

ACTA downloads

Full analysis bundle: re-runnable

FCS files

The 7 files

HLA-DR_BUV395_A2.fcs, HLA-DR_BUV395_A3.fcs, HLA-DR_BUV395_A4.fcs, HLA-DR_BUV395_A5.fcs, HLA-DR_BUV395_A6.fcs, HLA-DR_BUV395_A7.fcs, HLA-DR_BUV395_A8.fcs

FCS files (.zip, 7 files, 69.8 MB)

Full ACTA bundle

Everything ACTA wrote for the run: the filled TiterPubs template, the export and instructions workbooks, the panel inventory, the version files, the report, every plot and all 7 FCS files.

Full ACTA bundle (.zip, 77.4 MB)

ACTA report

ACTA's report on the run: its MiFlowCyt metadata, the plate map, the QC checks, every plot, the run's settings and the software versions.

Open in a new tabDownload (4.3 MB)

DOI

https://doi.org/10.64157/HTHY7118

Licence

CC BY 4.0Anyone may share and adapt this dataset, crediting the contributor and citing it.

Citation

Sharma, J. (2026). HLA-DR BUV395 Titration Dataset (TiterPubs HTHY7118) [Data set]. Metrdy. https://doi.org/10.64157/HTHY7118

Analysis software

ACTA 3.6.11 (Anybody Can Titrate Antibody)

Open-source (AGPL-3.0-only), by Jatin Sharma.Copyright (C) 2026 Lyell Immunopharma, Inc.

Bundle and templates written by ACTA's TiterPubs export.

How to cite ACTA

Sharma J. ACTA — Anybody Can Titrate Antibody [software]. Version 3.6.11. Lyell Immunopharma, Inc.; 2026. https://github.com/jatin199517/acta-public. https://doi.org/10.5281/zenodo.24181307

Until the ACTA paper is published, its author asks for ACTA to be cited by its GitHub repository and the version used, and by that version's DOI.

Named because the contributor analysed the data with it. Metrdy did not write ACTA and does not validate its results.

Reproduce this analysis

The bundle holds the instructions workbook that drove the run and the FCS files ACTA read. Install the ACTA version named above, unzip the bundle into an empty folder and run run_acta() on that folder.

remotes::install_github("jatin199517/acta-public@v3.6.11")library(ACTA)r <- run_acta("path/to/the/unzipped/bundle")

ACTA read every event of each file (Downsample_to is blank in the Info sheet): 928,406 events across the 7 files, 13,624 of them in the co-stain control (A2) and 143,601 to 156,345 in each stain well. Its report says the identity matrix was applied and the data were not compensated; the Info sheet's compensation setting is blank, and the bundle holds no compensation file.

Used this titer? Tell other labs how it went. Download the report form, then upload it on the Contribute tab or email it to us. We review every report and add it here, signed with your name.

How community reports workReport a problem privately