Skip to content
Back to TiterPubs

CD7 · RB780

Dataset ID: PKER2786 • DOI: 10.64157/PKER2786

Analysis software: ACTA 3.6.11

Contributed together with

Same submission, acquired 2026-04-01: 3 datasets, one per reagent. The full bundle and the report are the run's, the same on all 3 pages; the FCS files are this reagent's. Cite each dataset you use.

Figures

Stain index. Stain index of live cells at each stain volume, with ACTA's Michaelis-Menten fit. One panel per reagent in the run (CD19, CD56, CD7 from the left): CD7 is the right panel. For CD7, the fit (R² 0.987) puts 90% of the fitted maximum at 8.97 µL, beyond the highest volume tested (5 µL); the highest stain index, 51.5, is at 5 µL.
Saturation. Share of live cells in the positive gate at each stain volume, with the maximum ACTA marks. One panel per reagent in the run (CD19, CD56, CD7 from the left): CD7 is the right panel. For CD7, the highest share, 54.4% of live cells, is at 5 µL.
Concatenated events. CD7 fluorescence (RB780-A, detector FL05-A) of live cells at each stain volume, from the 0 µL co-stain control to 5 µL, each well's events side by side. One panel per reagent in the run (CD19, CD56, CD7 from the left): CD7 is the right panel. ACTA read 12,000 events from each file.
Gating scheme. The run's gating hierarchy, one tree for all three reagents, each gate coloured by the method that drew it: cells, single cells and live cells, then on live cells the reagent's positive and negative gates.

Experiment Information

Name
Jatin Sharma
Month of analysis
November
Year of analysis
2026
Collection Software
Everest
Analysis Software
ACTA
Plug-ins, other analysis tools
openCyto 2.22.0; flowCore 2.22.1
References
https://doi.org/10.5281/zenodo.24181307
Antigen
CD7
Clone
4H9
Conjugate
RB780
Target Species
Human
Supplier
BD Biosciences
Catalog #
569215
Lot #
5262308
Other antibodies in tube
Live Dead eFluor 780 (LD) (Viability) efluor780 · see the table
Instrument Manufacturer
Bio-Rad
Instrumentation
ZE5
Incubation Time
30 minutes
Incubation temperature (°C)
4
Incubation volume (µL)
100
Gating
live single cells ·
Tissue
blood
Cell type
mononuclear cells
Cell count
1000000
Fresh or Frozen
Frozen, thawed and incubated with antibody
Live or Fixed
Live at the time of antibody incubation
Fixed after antibody incubation?
Yes, antibody then fixed
Acquisition date
2026-04-01

Contact the contributor via MetrdyWe pass your message on; contributors' addresses are not published.

Other reagents in the tube

The panel the titrated reagent was stained with. Base reagents are fixed in the panel; Variable is the reagent this dataset titrates.

AntigenFluorochromeCloneVendorCatalog #Role
Live Dead eFluor 780 (LD) (Viability)efluor780Not givenBase
CD7RB7804H9BD Biosciences569215Variable

A titer holds for the conditions it was run under: cells, instrument and staining conditions all change it. Metrdy checks each submission for completeness before publishing it, but does not validate the results.

ACTA downloads

Full analysis bundle: re-runnable

FCS files

The 7 files

OQ_Test2_CD7_A12_Costain.fcs, OQ_Test2_CD7_B12_Stain.fcs, OQ_Test2_CD7_C12_Stain.fcs, OQ_Test2_CD7_D12_Stain.fcs, OQ_Test2_CD7_E12_Stain.fcs, OQ_Test2_CD7_F12_Stain.fcs, OQ_Test2_CD7_G12_Stain.fcs

FCS files (.zip, 7 files, 9.1 MB)

Full ACTA bundle

Everything ACTA wrote for the run, the same file on all three reagents' pages: a filled TiterPubs template per reagent, the export and instructions workbooks, the panel inventory, the compensation matrix, the version files, the report, every plot and all 21 FCS files.

Full ACTA bundle (.zip, 42.1 MB)

ACTA report

ACTA's report on the whole run, all three reagents: its MiFlowCyt metadata, the plate map, the QC checks, every plot, the run's settings and the software versions.

Open in a new tabDownload (8 MB)

DOI

https://doi.org/10.64157/PKER2786

Licence

CC BY 4.0Anyone may share and adapt this dataset, crediting the contributor and citing it.

Citation

Sharma, J. (2026). CD7 RB780 Titration Dataset (TiterPubs PKER2786) [Data set]. Metrdy. https://doi.org/10.64157/PKER2786

Analysis software

ACTA 3.6.11 (Anybody Can Titrate Antibody)

Open-source (AGPL-3.0-only), by Jatin Sharma.Copyright (C) 2026 Lyell Immunopharma, Inc.

Bundle and templates written by ACTA's TiterPubs export.

How to cite ACTA

Sharma J. ACTA — Anybody Can Titrate Antibody [software]. Version 3.6.11. Lyell Immunopharma, Inc.; 2026. https://github.com/jatin199517/acta-public. https://doi.org/10.5281/zenodo.24181307

Until the ACTA paper is published, its author asks for ACTA to be cited by its GitHub repository and the version used, and by that version's DOI.

Named because the contributor analysed the data with it. Metrdy did not write ACTA and does not validate its results.

Reproduce this analysis

The bundle holds the instructions workbook that drove the run and the FCS files ACTA read. Install the ACTA version named above, unzip the bundle into an empty folder and run run_acta() on that folder.

remotes::install_github("jatin199517/acta-public@v3.6.11")library(ACTA)r <- run_acta("path/to/the/unzipped/bundle")

ACTA read 12,000 of each file's 20,000 events (Downsample_to in the Info sheet; acta_version.tsv records seed 123): 252,000 events across the run's 21 files. Its report says the compensation matrix in the bundle's OQ_Test2_CompMatrix.csv was applied to every sample (the Info sheet's compensation setting reads csv).

Used this titer? Tell other labs how it went. Download the report form, then upload it on the Contribute tab or email it to us. We review every report and add it here, signed with your name.

How community reports workReport a problem privately